2008 Chevrolet Uplander Owner's Manual - Page 350

{CAUTION: You can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Do not spill coolant on a hot engine. 3. Fill the radiator with the proper DEX-COOL® coolant mixture, up to the base of the filler neck. See Engine Coolant on page 5-22 for more information about the proper coolant mixture. 4. Rinse or wipe any spilled coolant from the engine and the compartment. 5. Start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fans. 6. By this time, the coolant level inside the radiator filler neck may be lower. If the level is lower, add more of the proper DEX-COOL® coolant mixture through the filler neck until the level reaches the base of the filler neck. 7. Then replace the pressure cap. At any time during this procedure if coolant begins to flow out of the filler neck, reinstall the pressure cap. Be sure the pressure cap is closed properly. 5-30 Filling the Coolant Recovery Tank 8. Then fill the coolant recovery tank to the full cold mark. 9. Put the cap back on the coolant recovery tank.