2008 Chevrolet Uplander Owner's Manual - Page 364

Front Turn Signal, Parking and Daytime Running Lamps (DRL) Taillamps, Turn Signal, Stoplamps and Back-up Lamps To change a stoplamp/taillamp, turn signal or back-up lamp bulb: 1. Open the liftgate. See Liftgate on page 2-22 for more information. 2. Remove the two screws from the taillamp housing on the inboard side. To replace one of these bulbs (A): 1. Follow the Steps 1 through 4 to remove the headlamp assembly. See Headlamps and Sidemarker Lamps on page 5-42 for more information. 2. Turn the bulb socket counterclockwise to remove from the assembly. 3. Pull the old bulb out from the bulb socket. 4. Replace with a new bulb 5. Reinstall the bulb socket by inserting into the bulb assembly and turning it clockwise to secure. 6. Reverse the steps to reinstall the headlamp assembly. 5-44 3. Pull out the taillamp housing. 4. Disconnect the wiring harness connector from the taillamp assembly.