2009 Chevrolet Silverado 2500 HD Extended Cab Owner's Manual - Page 113

Tailgate Removal The tailgate can be removed to allow for different loading situations. Although the tailgate can be removed without assistance, you may want someone to assist you with the removal to avoid possible damage to the vehicle. On vehicles with a rear vision camera, it must be disconnected before removing the tailgate. See Rear Vision Camera (RVC) on page 2-65 for more information. To remove the tailgate, do the following: 1. Raise the tailgate slightly and release both retaining cable clips. To release the retaining cable clips, lift the cable so it points straight out. Lift the clip over the bolt, and push the cable forward then rotate down. 2. With the tailgate about halfway open, lift the right edge of the tailgate from the lower pivot. On vehicles with the tailgate assist feature, raise the tailgate nearly all the way to the closed position prior to removing the left edge. 3. Move the tailgate to the right to release the left edge. Reverse this procedure to reinstall the tailgate. Make sure the tailgate is secure. 2-13