2009 Chevrolet Silverado 2500 HD Extended Cab Owner's Manual - Page 63

Example - Rear Driver's Side Position 2.1. When using a child restraint with a top tether in the rear driver side position: A. Raise the headrest or head restraint. B. Route the top tether (B) between the headrest or head restraint posts, through the loop (A), behind the inboard headrest or head restraint post, and under the center shoulder belt (C). C. Attach the top tether (B) to the top tether anchor (loop) (D) at the center rear seating position. 2.2. When using a child restraint with a top tether in the rear center position: A. Route the top tether (B) through the center loop (D), and behind the inboard passenger side headrest or head restraint post. B. Attach the top tether (B) to the top tether anchor (loop) at the rear passenger side seating position. 2.3. When using a child restraint with a top tether in the rear passenger position: A. Raise the headrest or head restraint. B. Route the top tether (B) between the headrest or head restraint posts, through the loop on the passenger side and behind the inboard headrest or head restraint post. C. Attach the top tether (B) to the top tether anchor (loop) (D) at the center rear seating position. 2.4. Tighten the top tether when and as the child restraint manufacturer's instructions say. When the top tether is tightened, the anchor (loop) may bend. This is normal and will not damage the vehicle. 3. Push and pull the child restraint in different directions to be sure it is secure. 1-57