2009 Chevrolet Silverado 2500 HD Extended Cab Owner's Manual - Page 307

Linking to a Different Phone 1. Press and hold b g for two seconds. The system responds with "Ready" followed by a tone. 2. Say "Bluetooth". The system responds with "Bluetooth ready" followed by a tone. 3. Say "Change phone". The system responds with "Please wait while I search for other phones". Using the Store Command The store command allows a phone number to be stored without entering the digits individually. 1. Press and hold b g for two seconds. The system responds with "Ready" followed by a tone. 2. Say "Store". The system responds with "Store, number please" followed by a tone. 3. Say the complete phone number to be stored at once with no pauses. • If another phone is found, the response will be " is now connected". • If another phone is not found, the original phone remains connected. • If the system recognizes the number it responds with "OK, Storing" and repeats the phone number. Storing Name Tags The system can store up to thirty phone numbers as name tags that are shared between the Bluetooth and OnStar systems. The system uses the following commands to store and retrieve phone numbers: • If the system is unsure it recognizes the phone number, it responds with "Store" and repeats the number followed by "Please say yes or no". If the number is correct, say "Yes". If the number is not correct, say "No". The system will ask for the number to be re-entered. 4. After the system stores the phone number, it responds with "Please say the name tag" followed by a tone. • Store • Digit Store • Directory 3-121