2009 Chevrolet Silverado 2500 HD Extended Cab Owner's Manual - Page 169

Disconnecting the Rear Vision Camera To disconnect the camera: 1. Remove the license plate. 2. Disconnect the camera connector from the chassis harness, located behind the license plate, by pressing on the release tab on the chassis harness. A. Chassis harness B. Release tab C. Protective connector cap D. Camera connector cap A. Camera connector cap tab B. Chassis harness C. Release tab D. E. F. G. Camera connector Retaining clip Protective connector cap Camera connector cap 5. Lift up on the camera connector cap tab and remove the camera connector cap from the chassis harness, then install the camera connector cap on the camera connector. 6. Release the rear vision camera cable from the retaining clip. 7. Loosen the camera harness grommet from the pickup box and feed the harness through the pickup box. 8. Remove the tailgate. See Tailgate on page 2-12 for more information. Reverse this procedure to reinstall the rear vision camera and make sure the grommet and connection is secure. 2-69 3. Disconnect the protective connector cap from the chassis harness by pressing on the release tab on the chassis harness, then remove the cap. 4. Install the protective connector cap onto the chassis harness where the camera connector was located.