2010 Chevrolet Malibu Owner's Manual - Page 269

Dinghy Towing When dinghy towing, the vehicle should be run at the beginning of each day and at each RV fuel stop for about five minutes. This will ensure proper lubrication of transmission components. 3. Set the parking brake. 4. To prevent the battery from draining while the vehicle is being towed, remove the following fuse from the instrument panel fuse block: (IGN SENSOR). See Instrument Panel Fuse Block on page 6-105 for more information. 5. Turn the ignition to ACC/ACCESSORY. 6. Shift the transmission to N (Neutral). 7. Release the parking brake. Remember to reinstall the IGN SENSOR fuse once the destination has been reached. Notice: If 105 km/h (65 mph) is exceeded while towing the vehicle, it could be damaged. Never exceed 105 km/h (65 mph) while towing the vehicle. To dinghy tow the vehicle from the front with all four wheels on the ground: 1. Position the vehicle to tow and then secure it to the towing vehicle. 2. Shift the transmission to P (Park) and turn the ignition to LOCK/OFF. 5-27