2012 Chevrolet Equinox Owner's Manual - Page 142

5-26 Instruments and Controls Unit Press SET/CLR to enter the unit menu. Then press Q or R to switch between METRIC or US when the Unit display is active. Press SET/ CLR to confirm the setting. This will change the displays on the cluster and DIC to either metric or English (US) measurements. Tire Pressure The display will show a vehicle with the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or in pounds per square inch (psi). See Tire Pressure Monitor System on page 10‑51 and Tire Pressure Monitor Operation on page 10‑53 for more information. Remaining Oil Life This display shows an estimate of the oil's remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains. When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. See Engine Oil Messages on page 5‑29. The oil should be changed as soon as possible. See Engine Oil on page 10‑10. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule in this manual. See Maintenance Schedule on page 11‑3 for more information. Remember, the Oil Life display must be reset after each oil change. It will not reset itself. Also, be careful not to reset the Oil Life display accidentally at any time other than when the oil has just been changed. Turn-by-Turn This display is used for the OnStar or Navigation System Turn-by-Turn guidance. See OnStar Overview on page 14‑1 or the Navigation manual, if the vehicle has navigation, for more information. Blank Display This display shows no information. Vehicle Information Menu Items Press the MENU button until Vehicle Information Menu is displayed. Then press R to scroll through the following menu items: ... Unit Tire Pressure Remaining Oil Life Blank Display