2012 Chevrolet Equinox Owner's Manual - Page 16

1-10 In Brief Power Reclining Seatbacks Memory Features turned off. These automatically stored positions are referred to as RKE Memory positions. Storing Button Memory Positions To save positions into Button Memory: 1. Adjust the driver seat, seatback recliner, and both outside mirrors to the desired driving positions. 2. Press and hold MEM (Memory) and "1" at the same time until a beep sounds. To adjust a power seatback, if available: . Tilt the top of the control rearward to recline. Tilt the top of the control forward to raise. . See Reclining Seatbacks on page 3‑5. On vehicles with the memory feature, the "1" and "2" buttons on the outboard side of the driver seat are used to manually save and recall the driver seat and outside mirror positions. These manually stored positions are referred to as Button Memory positions. The vehicle will also automatically save driver seat and outside mirror positions to the current driver Remote Keyless Entry (RKE) transmitter when the ignition is 3. Repeat Steps 1 and 2 for a second driver using "2." To recall the manually saved Button Memory positions, press and hold "1" or "2." The driver seat and outside mirrors move to the positions stored to those buttons when pressed. Releasing "1" or "2" before the stored positions are reached stops the recall.