2006 Chrysler Crossfire Owner's Manual - Page 114
2006 Chrysler Crossfire Manual
Page 114 highlights
114 UNDERSTANDING YOUR INSTRUMENT PANEL To reset the trip odometer, press the knob/button once with the key in the ON/RUN position. Press the knob/ button twice with the key removed or in the OFF/LOCK or ACC position. The FSS permits a flexible service schedule that is directly related to the operating conditions of the vehicle. There are two symbols which will appear in the main odometer display field prior to the next suggested service. This symbol represents Service A. This second symbol represents Service B. The counter can also be reset by any individual after the indicated service has been performed. To do so: 1. Turn key to the ON/RUN position. 2. Within one second press the knob/button twice. 3. The present status for days or distance is displayed. Within 10 seconds turn the key to OFF/ LOCK. 4. Press and hold the knob/button, while turning the key to ON/RUN again. The present status for days or distance is displayed once more. Continue to hold the knob/button. After approximately 10 seconds, a signal sounds and the display shows 7,000 miles (Canada: 11,000 km) for approximately 10 seconds. 5. Release the knob/button. If the FSS counter was inadvertently reset, have an authorized dealer correct it. The message is displayed for approximately 10 seconds when turning the key to the ON/RUN position, Depending on operating conditions throughout the year, the next service is calculated and displayed next to this symbol in days remaining before the next service is required. Likewise, the next service may be calculated and displayed next to this symbol as distance remaining before the next service is required.