2006 Chrysler Crossfire Owner's Manual - Page 181

WHAT TO DO IN EMERGENCIES 181 WARNING! Cuts or punctures larger than approximately 0.16 in. (4 mm), tire damage caused by driving with extremely low tire pressure or on a flat tire, or a damaged wheel can pose a hazard while driving. TIREFIT should not be used in such circumstances. Do not drive the vehicle under such circumstances. Contact your nearest authorized dealer for assistance. Take care not to allow the contents of TIREFIT to come in contact with hair, eyes or clothing. TIREFIT is harmful if inhaled, swallowed or absorbed through the skin: It causes skin, eye and respiratory irritation. Any contact with eyes or skin should be flushed immediately with plenty of water. If clothing comes in contact with TIREFIT, change clothing as soon as possible. In case of allergic reaction or rash, consult a physician immediately. Keep TIREFIT out of reach of children. If swallowed, rinse mouth immediately with plenty of water and drink plenty of water. Do not induce vomiting! Consult a physician immediately. Keep away from open flame or heat source. Sealing tire with TIREFIT 1. Set the parking brake and turn on the hazard warning flashers. 2. Move the transmission selector lever to the PARK position (manual transmission to FIRST or REVERSE gear) and turn off the engine. 3. Remove the TIREFIT kit and electric air pump from the area below the cargo compartment carpet. 4. Open flap (2) on the electric air pump. 5. Pull the power plug (4) and air hose (5) along with the pressure gauge out of the air pump housing. 6. Screw the air hose (5) onto the hose connection on the TIREFIT sealant bottle (1). 7. Holding the sealant bottle by the top, insert it downwards into the recess (3) on the air pump. 8. Unscrew the valve cap from the valve on the deflated tire. 9. Screw the filler hose from the sealant bottle on the tire valve. 10. Insert the power plug (4) into the power point on the instrument panel. 6