2006 Chrysler Sebring Owner's Manual - Page 130
2006 Chrysler Sebring Manual
Page 130 highlights
130 UNDERSTANDING YOUR INSTRUMENT PANEL Fan Control Use this control to regulate the amount of air forced through the system in any mode you select. Turn the control clockwise to increase fan speed. In ambient temperatures below 21°C (70°F), fan operation is delayed when the engine is first started. The fan will automatically start when the engine coolant is warm enough to heat the air. This feature can be defeated by turning the fan control. NOTE: While in Automatic Temperature Control, changing the fan control position will switch control back into manual control. AUTO Control Press the top of the button to turn the ATC system On. Press the lower portion of the button to turn the entire system Off. Comfort Control Use this control to regulate the comfort inside the passenger compartment. Press the top of the switch to raise the temperature selection and the bottom of the switch to lower it. The comfort setting range is from Low, 60, 61,...to 89,90, Hi, for automatic temperature control. You can select a very hot or cold comfort setting by holding the comfort control until it reaches its highest or lowest levels. The system adjusts to bring the interior temperature to the desired comfort level. All comfort settings are automatic; even Hi and Low. NOTE: You can change the display from U.S. to metric units by pressing the Mix and Panel mode buttons simultaneously or by pressing the English/Metric button on the overhead console. Air Conditioning Button Press this button to turn on the air conditioning compressor. A snow flake symbol in the display shows that the compressor is on. Compressor operation is automatic when you press the Auto button. The compressor can operate at any temperature above 32°F (0°C). With the compressor off and the temperature set at Lo, air entering the vehicle will be slightly warmer than the air outside the vehicle.