2008 Chrysler Sebring Owner Manual Sedan - Page 190
2008 Chrysler Sebring Manual
Page 190 highlights
188 UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Compass Calibration This compass is self-calibrating, which eliminates the need to calibrate the compass manually. When the vehicle is new, the compass may appear erratic and the EVIC will flash the "CAL" indicator until the compass is calibrated. You may calibrate the compass by completing one or more 360 degree turns (in an area free from large metal or metallic objects) until the CAL indicator in the EVIC turns off. The compass will now function normally. Manual Compass Calibration If the compass appears erratic, inaccurate, or abnormal, you may wish to calibrate the compass manually. However, prior to calibrating the compass, make sure the proper Compass Variance value is selected (Refer to "Compass Variance" for additional information). Then continue to calibrate the compass as follows: 1. Start the engine. Leave the selector lever in PARK in order to enter the EVIC Programming Menus. 2. Press and release the MENU button until "Personal Settings" displays in the EVIC. 3. Press and release the STEP button until "Calibrate Compass Yes" displays in the EVIC. 4. Press and release the RESET button and the "CAL" indicator will quit flashing. 5. Drive the vehicle slowly, completing one or more circles (in an area free from large metal or metallic objects) until the "CAL" indicator turns off. The compass will now function normally.