2009 Chrysler Aspen Owner Manual - Page 139

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Setting Memory Positions and Linking RKE Transmitter to Memory NOTE: Each time the S (SET) button and a numbered button (1 or 2) are pressed, you erase the memory settings for that button and store new settings. 1. Turn the vehicle key to the ON/RUN position. 2. Adjust the driver's seat, recliner, and both sideview mirrors to the desired positions. NOTE: Not all motors may be moved at one time. Refer to the eight-way power seat description in this section. 3. Adjust the brake and accelerator pedals to the desired positions. 4. Turn on the radio and set the radio station presets (up to 10 AM and 10 FM stations can be set). 5. Adjust the Automatic Temperature Control (ATC) while the ATC is in Auto mode. 6. Press and release the SET button located on the driver's door. 7. Within five seconds, press and release memory button 1 or 2 on the driver's door. The next steps must be performed within 10 seconds if you desire to also use a RKE transmitter to recall memory positions. 8. Turn the vehicle off and remove the key. 9. Press and release the LOCK button on one of the RKE transmitters. 10. Insert the ignition key and turn the ignition switch to the ON position. 11. Repeat the above steps to set the next memory position using the other numbered memory button or to link another RKE transmitter to memory. NOTE: A chime sound may be heard if Setting Memory was inhibited for any reason. 3