2009 Chrysler Aspen Owner Manual Supplement Hybrid - Page 28
2009 Chrysler Aspen Manual
Page 28 highlights
26 UNDERSTANDING YOUR INSTRUMENT PANEL The Vehicle Security Light will also illuminate for approximately three seconds when the ignition is first turned ON. 12. Anti-Lock Brake (ABS) Warning Light This light monitors the Anti-Lock Brake System (ABS) which is described in the Owner's Manual. This light will come on when the ignition key is turned to the ON position and may stay on for approximately three seconds. If this light remains on or comes on during driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required. See your authorized dealer immediately. With the ABS malfunctioning, the Brake Assist System (BAS) and Electronic Stability Program (ESP) are also switched off. Both malfunction indicator lights illuminate with the engine running. If the charging voltage falls below 10-Volts, the malfunction indicator light illuminates and the ABS is switched off. When the voltage is above this value again, the malfunction indicator light should go out and the ABS is operational. If the malfunction indicator light stays illuminated, have the system checked at your authorized dealer as soon as possible. 13. Oil Pressure Warning Light This light indicates that the engine oil pressure has become too low. For a bulb check, this light will illuminate momentarily when the ignition is turned ON. If the light comes on while driving, stop the vehicle and shut off the engine as soon as possible. See your authorized dealer for service immediately. 14. Hybrid Gauge This gauge indicates in what mode the vehicle is being operated. Refer to "Hybrid Gauge" under "Instrument Panel And Controls", in this Section of the supplement.