2009 Chrysler Aspen Owner Manual Supplement Hybrid - Page 31
2009 Chrysler Aspen Manual
Page 31 highlights
UNDERSTANDING YOUR INSTRUMENT PANEL 29 U.S. Federal regulations require that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven. Therefore, if the odometer reading is changed during repair or replacement, be sure to keep a record of the reading before and after the service so that the correct mileage can be determined. 18. Fog Light Indicator This light illuminates when the fog lights are on. 19. Electronic Stability Program (ESP) Indicator Light The yellow ESP indicator light in the speedometer area illuminates with the key in the ignition switch turned to the ON/RUN position. It should go out with the engine running. The ESP/TCS indicator light starts to flash as soon as the tires lose traction and the ESP system becomes active. The ESP/TCS indicator light also flashes when TCS is active as well as when the ABS is active. If the ESP/TCS indicator light begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. The ESP/TCS indicator light becomes illuminated when the ESP-OFF button has been pressed or ESP is only partially available, caused by lack of engine management or brake thermal model. 20. Transmission Temperature Indicator This light indicates that there is excessive transmission fluid temperature that might occur with severe usage, such as trailer towing. If this light comes on, stop the vehicle, press the TOW/HAUL button, and run the engine at idle or faster with the transmission in NEUTRAL until the light goes off. 4