2015 Chrysler Town & Country User Guide - Page 30

G E T T I N G S TA R T E D Memory Seat The memory seat feature allows you to save two different driver seating positions, driver's outside mirror, adjustable brake and accelerator pedals, and radio station preset settings. The memory seat buttons are located on the driver's door panel. To set a memory position: 1. Cycle the vehicles ignition to the ON position. 2. Adjust all memory profile settings. 3. Press and release the S (SET) button. Memory Seat Button Location 4. Press and release the 1 or 2 button within five seconds. NOTE: Before programming your RKE transmitters you must select the select "RKE Linked to Memory" in the Electronic Vehicle Information Center (EVIC). Refer to "Programmable Features" in "Electronics" for further information. To program a Key Fob to the memory position: 1. Cycle the vehicles ignition to the OFF position. 2. Select the desired memory profile 1 or 2. 3. Press and release the S (SET) button on the memory switch, then within five seconds press and release the 1 or 2 button accordingly. 4. Press and release the LOCK button on the RKE transmitter within 10 seconds. • To recall the saved positions, press 1 or 2 on the memory switch or press UNLOCK on the programmed RKE transmitter. CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat's path. WARNING! • • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted, and you could be severely injured or killed. Only adjust a seat while the vehicle is parked. Do not ride with the seatback reclined so that the seat belt is no longer resting against your chest. In a collision, you could slide under the seat belt and be severely injured or killed. Use the recliner only when the vehicle is parked. 28