2013 Dodge Durango Owner's Manual - Page 62

60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. 1. Position the latch plate as close as possible to the The belt will automatically retract to its stowed posianchor point. tion. If necessary, slide the latch plate down the 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, webbing to allow it to retract fully. grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate. WARNING! In the front seating positions, the shoulder belt can be adjusted upward or downward to position the belt away from your neck. Press the release button to release the Use the following procedure to untwist a twisted lap/ anchorage, and then move it up or down to the position shoulder belt. that fits you best. Lap/Shoulder Belt Untwisting Procedure A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Seat belt assemblies must be replaced after a collision if they have been damaged (bent retractor, torn webbing, etc.). 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate. 4. Continue to slide the latch plate up until it clears the folded webbing. Adjustable Upper Shoulder Belt Anchorage