2015 Dodge Challenger User Guide - Page 152

SRT Braking Distance When selected, this screen displays the vehicle's braking distance and the speed at which the brake pedal was depressed. • This feature will only function when applying the brakes at speeds above 30 mph (48 km/h). • Engaging the parking brake will disable this feature. • The word "READY" will display when conditions are met for the event to begin. • The distance and speed measurements display while the event is taking place. • The distance measurement will be aborted if the brake pedal is released before the vehicle comes to a complete stop. • The distance and speed measurements will continue to display until the OK button is pushed. • Pushing the OK button will clear the current run and prepare the cluster to record a new run. Current G-Force • When selected, this screen displays the current G-Force (lateral and longitudinal) along with a friction circle that displays the directions of the forces. Peak G-Force When selected, this screen displays all four G-Force values (two lateral and two longitudinal). • When a force greater than zero is measured, the display will update the value as it climbs. As the G-Force falls, the peak forces will continue to display. • Pushing the OK button will clear the peak force values. Lap Timer When selected the Lap Timer page will show the timer always at 0:00.00 with the previous Best and Last time data (unless the driver has cleared it via hold to Reset). • Pushing OK will start "current" timer from 0:00.0. • When OK is pushed the times are updated accordingly. • As soon as the driver exits the Lap Timer pages the "current" timer will stop and the time will be reset to 0:00.00. • If the driver stays on the Lap Timer pages the "current" timer will reset to 0:00.0 when ignition is placed in the off position, or ignition placed in the ON position (or will roll over at 59:59.99 if ever possible). • Each time the driver pushes OK for a Lap that current time populates the Last time and also populates the 1st (top) space on the Timer History page the current time resets to 0:00.0 at every push of the OK button. • The timer will stop when the driver navigates away from this page. 150