2015 Dodge Challenger User Guide - Page 18

GETTING STARTED Engine Starting/Stopping - Automatic Transmission Starting • Place the shift lever in PARK or NEUTRAL. • While pushing the brake pedal, push the ENGINE START/STOP button once. If the engine fails to start, the starter will disengage automatically after 10 seconds. • To stop the cranking of the engine prior to the engine starting, push the button again. Stopping • Place the shift lever in PARK. • Push the ENGINE START/STOP button once. The ignition switch will return to the OFF position. 1 - Start/Stop Button • If the shift lever is not in PARK, the ENGINE START/STOP button must be held for two seconds and vehicle speed must be above 5 mph (8 km/h) before the engine will shut off. NOTE: If the ignition switch is left in the ACC or RUN (engine not running) position and the transmission is in PARK, the system will automatically time out after 30 minutes of inactivity and the ignition will switch to the OFF position. Engine Starting/Stopping - Manual Transmission Starting • Push and hold the clutch pedal while pushing and holding the ENGINE START/STOP button. Release the button when the engine starts. If the engine fails to start within 15 seconds, release the button, wait 10 to 15 seconds, then repeat. • To stop the cranking of the engine prior to the engine starting, release the button. Stopping • With the vehicle stopped, place the shift lever in NEUTRAL. • Push the ENGINE START/STOP button once. The ignition switch will return to the OFF position. • If the vehicle speed is above 5 mph (8 km/h), the ENGINE START/STOP button must be held for two seconds before the engine will shut off. The ignition switch position will remain in the ACC position until the vehicle is stopped and the button is pressed twice to the OFF position. NOTE: If the ignition switch is left in the ACC position, the system will automatically time out after 60 minutes of inactivity and the ignition will switch to the OFF position. 16