2001 Ford Windstar Owner Guide 3rd Printing - Page 109

Controls and features • 5-button remote If a transmitter has been lost or if you would like to purchase additional transmitters for your vehicle (up to four may be programmed into memory), take all your vehicle's transmitters to your dealer or perform the reprogramming procedure yourself. It will be necessary to reprogram all the transmitters to the vehicle at the same time while performing this procedure. Reprogramming transmitters To reprogram the transmitters yourself, place the key in the ignition and turn from LOCK to OFF and cycle between OFF and ON eight times in rapid succession (within 10 seconds) ending in the ON position. After doors lock/unlock, press any control on all transmitters (up to four). With each control press of the transmitters, the door should cycle (lock/unlock) to confirm programming. When completed, turn the ignition to OFF. The door locks should cycle (lock/unlock) one last time to confirm completion of programming. Memory seat/mirrors/adjustable pedal feature (if equipped) The memory feature allows automatic positioning of the driver seat, side mirrors and adjustable pedals to two programmable positions. • To program position one, move the driver seat, both side mirrors, and adjustable pedals to the desired positions. Press the SET control. The SET control indicator light will briefly illuminate. While the light is illuminated, press control 1. • To program position two, repeat the previous procedure using control 2. The memory feature also allows you to recall previously stored positions with your remote transmitter(s). Press the memory feature control to move to the previously stored seat/mirror/adjustable pedal positions. 109