2001 Ford Windstar Owner Guide 3rd Printing - Page 110

Controls and features Activating/deactivating the memory feature on your remote transmitter The memory feature from the remote transmitter can be turned off/on, however, the memory control buttons will continue to operate. Before following the procedure, make sure that the ignition is OFF and all doors and the liftgate window are closed. You must complete steps 1-7 within 30 seconds or the procedure will have to be repeated. If the procedure needs to be repeated, you must wait 30 seconds. 1. Turn the ignition key to ON. 2. Press the power door unlock control three times. 3. Turn the ignition key from ON to OFF. 4. Press the power door unlock control three times. 5. Turn the ignition back to ON. The horn will chirp. 6. Press the power door unlock control two times, then press the power lock control once. The horn will chirp twice if the memory feature was deactivated or three times (two short and one long) if the memory feature was activated. 7. Turn ignition to OFF. The horn will chirp once to confirm the procedure is complete. Autolock This feature automatically locks all vehicle doors when: • all doors are closed • the engine is running • you shift into any gear putting the vehicle in motion. Relock The autolock feature repeats when: • any door, except the drivers, is opened then closed while the engine is running and • you put the vehicle in motion. Deactivating/activating the autolock feature The deactivating/activating the autolock feature can be turned off by the keyless entry pad (if equipped) on your door or by your dealer. Deactivating/activating the illuminated exit feature The illuminated exit feature can be turned off by your dealer. 110