2001 Ford Windstar Owner Guide 3rd Printing - Page 177

Driving When to use (Overdrive) or press the O/D OFF switch You will notice that there is only one drive position ( [Overdrive]) on O/D ON/OFF your gearshift indicator (instead of Drive and Overdrive). However, you will find a control labeled O/D located on the gearshift lever. Push in the switch and the O/D OFF light in the instrument cluster will illuminate. With the O/D OFF light illuminated, the transaxle will operate in first, second and third gears and [Overdrive]). Operating in Drive (O/D will not shift into fourth gear ( OFF) provides more engine braking than (Overdrive) for descending hills or city driving. To return the transaxle to the normal (Overdrive) operation, press the O/D OFF control again. Use this control to select between (Overdrive) or Drive (O/D OFF) whenever you drive your vehicle. If the O/D OFF indicator light is flashing on and off repeatedly when the vehicle is started or does not come on when the O/D OFF control is pressed, it means that there is a transaxle electronic system malfunction. You should contact your dealer as soon as possible or damage to the transaxle could occur. 2 (Second) Use 2 (Second) to accelerate from a stop on slippery roads, or to give you more engine braking to slow your vehicle on downgrades. 1 (First) Use 1 (First) when added engine braking is desired while descending steep hills. Manual downshifts to 1(first) can be obtained at speeds below 15 mph. The automatic transaxle will shift to the proper gear to ascend any grade without any need to shift to 1 (First). Do not go faster than 61 km/h (38 mph) when in this gear. You can upshift from 1 (First) to overdrive at any time. 177