2001 Ford Windstar Owner Guide 3rd Printing - Page 122

Seating and safety restraints Using the power lumbar support (if equipped) The power lumbar control is located on the inboard side of the seat. Press one side of the control to adjust firmness. Press the other side of the control to adjust softness. Memory seats/rearview mirrors/adjustable pedals (if equipped) This system allows automatic positioning of the driver seat, outside rearview mirrors, and SET adjustable pedals to two programmable positions. The memory seat control is located on the driver door. 1 2 • To program position one, move the driver seat to the desired position using the seat controls. Press the SET control. The SET control indicator light will briefly illuminate. While the light is illuminated, press control 1. • To program position two, repeat the previous procedure using control 2. A position can only be recalled when the transmission gearshift is in Park. A memory seat position may be programmed at any time. The memory seat positions are also recalled when you press your remote entry transmitter UNLOCK control. To program the memory seat to remote entry transmitter, refer to Remote entry system in the Controls and features chapter. Rear seats Head restraints Your vehicle's seats may be equipped with head restraints which are vertically adjustable. The purpose of these head restraints is to help limit head motion in the event of a rear collision. To properly adjust your head restraints, lift the head restraint so that it is located directly behind your head or as close to that position as possible. Refer to the following to raise and lower the head restraints. 122