2005 Ford F150 Owner Guide 5th Printing - Page 88

Locks and Security The (lock) and (unlock) features will work again after: • a door has become ajar, • the ignition is turned to the 3 (ON) position, or control on your remote entry transmitter or • using the UNLOCK unlocking via the keyless entry keypad. Deactivating/activating power door lock/unlock disable feature All vehicle doors must be closed before beginning the procedure. You must complete Steps 1-5 within 30 seconds, or the procedure will have to be repeated. If the procedure needs to be repeated, you must wait a minimum of 30 seconds to begin again. 1. Turn the ignition to the 3 (ON) position, then press the three times. button 2. Turn the ignition to the 1 (OFF/LOCK) position, then press the button three times. 3. Turn the ignition to the 3 (ON) position; the horn will chirp to indicate the driver configuration mode has been activated. control two times. Note: One horn 4. Within five seconds, press the chirp should be heard, indicating the system has been disabled. 5. Turn the ignition to the 1 (OFF/LOCK) position to exit programming. Note: After exiting the driver configuration mode, the horn will chirp once to indicate a feature has been activated/deactivated. Sounding a panic alarm to activate the alarm. Press again or turn the ignition to 2 Press (ACCESSORY) or 3 (ON) to deactivate. Note: The panic alarm will only operate when the ignition is in the 1 (OFF/LOCK) position. Memory feature (if equipped) The remote entry system can also control the memory feature. control once to unlock the driver's door. Pressing the Press the control will automatically move the seat and adjustable pedals to the desired memory position (the memory position corresponds to the transmitter being used). 88 2005 F-150 (f12) Owners Guide (post-2002-fmt) USA (fus)