2005 Ford F150 Owner Guide 5th Printing - Page 89

Locks and Security Activating the memory feature To activate this feature: 1. Position the seat and adjustable pedals to the positions you desire. 2. Press the SET control on the driver's seat. SET 3. Within 5 five seconds, press one control on the remote transmitter and then press the 1 or 2 control on the driver's door panel to which you would like to associate with Driver 1 1 2 or Driver 2 positions. 4. Repeat this procedure for another remote transmitter if desired. Deactivating the memory feature To deactivate this feature: 1. Press the SET control on the driver's door seat. 2. Within 5 five seconds, press any control on the remote transmitter which you would like to deactivate and then press the SET control on the driver's door panel. 3. Repeat this procedure for another remote transmitter if desired. Replacing the battery The remote entry transmitter uses one coin type three-volt lithium battery CR2032 or equivalent. To replace the battery: 1. Twist a thin coin between the two halves of the remote entry transmitter near the key ring. DO NOT TAKE THE RUBBER COVER AND CIRCUIT BOARD OFF THE FRONT HOUSING OF THE REMOTE ENTRY TRANSMITTER. 89 2005 F-150 (f12) Owners Guide (post-2002-fmt) USA (fus)