2008 Ford Mustang Owner Guide 3rd Printing - Page 204

Roadside Emergencies 4. Put the jack in the jack notch next to the tire you are changing. Turn the jack handle clockwise until the wheel is completely off the ground. Never use the rear differential as a jacking point. To lessen the risk of personal injury, do not put any part of your body under the vehicle while changing a tire. Do not start the engine when your vehicle is on the jack. The jack is only meant for changing the tire. 5. Remove the lug nuts with the lug wrench. 6. Replace the flat tire with the spare tire, making sure the valve stem is facing outward. Reinstall lug nuts until the wheel is snug against the hub. Do not fully tighten the lug nuts until the wheel has been lowered. If you are using the temporary tire, the lug nut washers will not appear to be flush with the rim. This is normal only when using the temporary spare tire. 7. Lower the wheel by turning the jack handle counterclockwise. 8. Remove the jack and fully tighten 1 the lug nuts in the order shown. Refer to Wheel lug nut torque specifications later in this chapter 3 4 for the proper lug nut torque specification. 9. Put flat tire, wheel ornament (if equipped), jack and lug wrench 5 2 away. Make sure the jack is fastened so it does not rattle when you drive. 10. Unblock the wheel. 204 2008 05+ Mustang (197) Owners Guide (post-2002-fmt) USA (fus)