2008 Ford Mustang Owner Guide 3rd Printing - Page 57

Lights 6. Pull the bulb straight from the socket. Install the new bulb in reverse order. Replacing rear sidemarker lamp bulbs 1. Make sure the headlamp switch is in the off position and locate the sidemarker on the rear bumper fascia. 2. Install a flathead screwdriver between the rear of the sidemarker lens and the bumper fascia. 3. Push the screwdriver to the front of the vehicle and then slide it towards you to pop out the lens cover. 4. Carefully pull the bulb straight out of socket. Install the new bulb in reverse order. Replacing high-mount brake lamp bulbs 1. Make sure the headlamp switch is in the off position and then open the trunk. 2. Inside trunk, pull the trim panel straight off of the underside of the trunk lid. 3. Locate the lighting assembly and push the release tab to access the bulb socket. 57 2008 05+ Mustang (197) Owners Guide (post-2002-fmt) USA (fus)