2008 Ford Mustang Owner Guide 3rd Printing - Page 56

Lights 1. Make sure headlamp switch is in the off position, then open the trunk. 2. Carefully remove fasteners around the lamp area and then remove the interior trunk trim. 3. Remove three nut and washer assemblies and the lamp assembly from the vehicle. 4. Disconnect the electrical grommet by pulling it straight off of the lamp assembly. 5. Remove the bulb socket by rotating it counterclockwise, then pulling it out of the lamp assembly. 6. Pull the bulb straight from the socket. Install the new bulb in reverse order. Replacing backup bulbs The backup lamp is located in the tail lamp assembly. Follow the same steps to replace either bulb. 1. Make sure headlamp switch is in the off position, then open the trunk. 2. Carefully remove fasteners around the lamp area, then remove the interior trunk trim. 3. Disconnect the electrical connector by pulling it straight off of the lamp assembly. 4. Remove the three nut and washer assemblies and the lamp assembly from the vehicle. 5. Remove the bulb socket by rotating it counterclockwise, then pulling it out of the lamp assembly. 56 2008 05+ Mustang (197) Owners Guide (post-2002-fmt) USA (fus)