2009 Ford E250 Cargo Owner Guide 2nd Printing - Page 165
2009 Ford E250 Cargo Manual
Page 165 highlights
Tires, Wheels and Loading Since tires need to be rotated to provide consistent performance and maximum tire life, the Tire Pressure Monitoring System needs to know when the tires are rotated to determine which set of tires are on the front and which are on the rear. With this information, the system can detect and properly warn of low tire pressures. WARNING: Always perform the TPMS reset procedure after tire rotation when recommended pressures are different for the front and rear tires. TPMS reset tool A special TPMS reset tool to reset your TPMS after tire rotation is provided with vehicles that have different front and rear tire pressures. The tool is located with your Owner's Guide materials. Please take the tool with the provided Velcro strip on the back and mount it in the bottom right corner of your Owner's Guide case (as shown) for safe keeping. If you find that the reset tool was not provided when delivered, has been lost or no longer functions (the battery is not replaceable), please contact your authorized dealer as soon as possible to obtain a replacement. To verify that your TPMS reset tool is working, press and release the button on the center of the TPMS tool. The red light should illuminate and remain on for approximately five (5) seconds. If the light does not illuminate, the tool needs to be replaced. TPMS reset tips: • To reduce the chances of interference from another vehicle, TPMS reset should be performed at least three feet (one meter) away from another Ford Motor Company vehicle undergoing the TPMS reset procedure at the same time. • Do not wait more than two (2) minutes between resetting each tire sensor or the system will timeout and the entire procedure will have to be repeated on all four wheels. • A double horn chirp indicates the need to repeat the procedure. 165 2009 Econoline (eco) Owners Guide, 2nd Printing USA (fus)