2009 Ford E250 Cargo Owner Guide 2nd Printing - Page 57

Lights Replacing high-mount brakelamp bulbs On vehicles without a rear headliner, the interior cargo lamp (if equipped) will have to be removed from under the high-mount brakelamp assembly located inside the vehicle. Then, do the following: 1. Remove the two screws from the high-mount brakelamp assembly and lift the lamp from the vehicle. 2. Remove the bulb socket from the lamp assembly by turning counterclockwise. 3. Carefully pull the bulb straight out of the socket. To install the new bulb, follow the removal procedure in reverse order. Replacing license plate lamp bulbs 1. Turn the headlamp switch to the off position. 2. Remove the two screws and the license plate lamp assembly from the rear door. 3. Remove bulb socket from lamp assembly by turning counterclockwise. 4. Pull the bulb out from socket and push in the new bulb. To install the new bulb, follow the removal procedures in reverse order. 57 2009 Econoline (eco) Owners Guide, 2nd Printing USA (fus)