2009 Ford E250 Cargo Owner Guide 2nd Printing - Page 55

Lights Replacing headlamps (sealed beam) 1. Make sure the headlamp switch is in the off position and open the hood. 2. Remove the four screws from the top and bottom front of the headlamp assembly and carefully remove the lamp/bezel. 3. Remove the four screws and the retaining ring. 4. Disconnect the electrical connector from the lamp and remove the lamp. To install the new lamp, follow the removal procedures in reverse order. Replacing front parking lamp/turn signal bulbs 1. Make sure the headlamp control is in the off position. 2. Remove the headlamp assembly, refer to Replacing headlamp bulbs in this section. Aerodynamic Sealed beam 55 2009 Econoline (eco) Owners Guide, 2nd Printing USA (fus)