2009 Ford E250 Cargo Owner Guide 2nd Printing - Page 63
2009 Ford E250 Cargo Manual
Page 63 highlights
Driver Controls 3. Press and hold the SELECT control until VAR appears in the display, then release. The display should show the current zone number. 9 4. Press the SELECT control until the desired zone number appears. The display will flash and then return to normal operation. The zone is now updated. VAR Compass calibration adjustment Perform this adjustment in an open area free from steel structures and high voltage lines: • Press and hold the SELECT control until CAL appears in the CAL display (approximately eight seconds) and release. • Drive the vehicle slowly (less than 3 mph [5 km/h]) in circles until CAL indicator turns off in about 2-3 complete circles. • The compass is now calibrated. AUXILIARY POWER POINT (12VDC) Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlet as this will damage the outlet and blow the fuse. Do not hang any type of accessory or accessory bracket from the plug. Improper use of the power outlet can cause damage not covered by your warranty. The auxiliary power point (equipped with a cover or a cap plug) is located on the instrument panel. A second power point (if equipped) is located behind the driver's seat on the upper trim panel. A third power point (if equipped) is located in the glove box. Do not use the power point for operating the cigarette lighter element (if equipped). 63 2009 Econoline (eco) Owners Guide, 2nd Printing USA (fus)