2013 Ford E350 Super Duty Passenger Owner Manual Printing 3 - Page 222
2013 Ford E350 Super Duty Passenger Manual
Page 222 highlights
Maintenance 221 ADJUSTING THE HEADLAMPS The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident, the alignment of your headlamps should be checked by your authorized dealer. Vertical and Horizontal Aim Adjustment (Sealed Beam Headlamps) The headlamps on your vehicle are intended to be aimed using mechanical aimers. If mechanical aimers are used and the cross-car sight line is in any way blocked, set the legs of the universal adaptor all to the same setting, such that the cross-car sight line is no longer blocked, per the instructions for the brand of mechanical aimer used. You can also aim the headlamps visually using the procedure below. To adjust the headlamps: 1. Park your vehicle on a level surface about 25 feet (7.6 meters) away from a vertical plain surface. Check your headlamp alignment at night or in a dark area so that you can see the headlamp beam pattern. • (A) 8 feet (2.4 meters) A F • (B) Center height of lamp to E ground • (C) 25 feet (7.6 meters) D • (D) Horizontal reference line B • (E) Vertical reference line for the center of the headlamp C • (F) Vertical reference line for the center of the vehicle 2. The center of the headlamp is marked either on the lens (a circle or cross marker) or on the bulb shield, internal to the lamp (mark or feature). Measure the height from the center of your headlamp to the ground (B) and mark an 8 foot (2.4 meter) long horizontal line on the wall or screen (D) at this height (masking tape works well). 2013 Econoline (eco) Owners Guide gf, 3rd Printing, May 2013 USA (fus)