2013 Ford E350 Super Duty Passenger Owner Manual Printing 3 - Page 59

58 Keys and Remote Control Reprogramming Your Remote Controls You must have all remote controls (maximum of four) available before beginning this procedure. If all remote controls are not present during programming, the ones missing will no longer operate the vehicle. Note: Make sure you do not press the brake pedal during this sequence. To reprogram the remote control: 1. Make sure the vehicle is electronically unlocked. 2. Place the key in the ignition and turn it from lock to off. 3. Cycle eight times rapidly (within 10 seconds) between off and on. Note: The eighth turn must end in the on position. 4. The doors will lock, and then unlock, to confirm that you have activated the programming mode. 5. Within 20 seconds press any button on the remote control. Note: If more than 20 seconds have passed you will need to start the procedure over. 6. The doors will lock, and then unlock, to confirm that you have programmed this remote control. 7. Repeat Step 5 to program each additional remote control (up to four). 8. Turn the ignition off after you have finished programming all of the remote controls. 9. The doors will lock, and then unlock, to confirm that you have exited the programming mode. 2013 Econoline (eco) Owners Guide gf, 3rd Printing, May 2013 USA (fus)