2014 Ford Flex Owner Manual Printing 1 - Page 309

308 Maintenance 2. Lift the passenger's side of the cover and push the cover toward the passenger's side. Release the three tabs on the cover from the three slots in the driver's side of the housing. 3. Carefully separate the cover from the housing. 4. Remove the air filter element from the housing. 5. Wipe the cover and the housing clean to remove any dirt or debris and to make sure the cover seals to the housing. 6. Install a new air filter element. Be careful not to crimp the filter element edges between the housing and the cover. This could cause filter damage and allow unfiltered air to enter the engine if not properly seated. 7. Lower the driver's side of the cover and slide the three tabs on the cover into the three slots in the housing. 8. Lower the passenger's side of the cover. Engage the two clamps to secure the cover to the housing. ADJUSTING THE HEADLAMPS The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident, the alignment of your headlamps should be checked by your authorized dealer. Vertical Aim Adjustment 1. Park the vehicle directly in front of a wall or screen on a level surface, approximately 25 feet (7.6 meters) away. 2014 Flex (471) Owners Guide gf, 1st Printing, April 2013 USA (fus)