2014 Ford Flex Owner Manual Printing 1 - Page 68

Keys and Remote Control Programming memory to the transmitter To activate this feature: 67 1. Move the memory features to the desired positions using the associated controls. 2. Press and hold button 1 for five seconds. A tone will sound confirming memory position has 2 1 been set. Continue to hold until a second tone is heard after five seconds. 3. Within three seconds press the lock button on the remote control. 4. Wait 10 seconds, then press the unlock button on the remote control. 5. Repeat this procedure for memory button 2 and another transmitter if desired. Deactivating memory from the transmitter To deactivate this feature: 1. Press and hold either the 1 or 2 button for five seconds. A tone will sound when the memory store is done. Continue to hold until a second tone is heard. 2. Within three seconds press the unlock button on the remote control . 3. Repeat this procedure for each additional transmitter if desired. Car Finder Press the button twice within three seconds. The horn will sound and the turn signals will flash. We recommend you use this method to locate your vehicle, rather than using the panic alarm. Sounding a Panic Alarm Press the button to activate the alarm. Press the button again or switch the ignition on to deactivate. Note: The panic alarm will only operate when the ignition is off. 2014 Flex (471) Owners Guide gf, 1st Printing, April 2013 USA (fus)