2014 Ford Flex Owner Manual Printing 1 - Page 90

Security 89 5. Press and release the brake pedal one time. The indicator on the START/STOP button should begin to rapidly flash, indicating the programming mode has been entered and two programmed intelligent access keys have been detected in your vehicle. 6. Press the START/STOP button within one minute. A message will appear in the information display indicating that the new intelligent access key was programmed. 7. Remove the intelligent access key from the center console pocket and press the unlock button on the newly programmed intelligent access key to exit programming mode. 8. Verify that the remote entry functions operate (press lock then unlock, making sure you end in unlock) and that your vehicle starts with new intelligent access key. ANTI-THEFT ALARM (IF EQUIPPED) The system will warn you of unauthorized entry to your vehicle. The turn signal lamps will flash and sound the horn up to a total of 10 times when: • any door, the hood or the luggage compartment is opened without using the keypad, the remote control or the intelligent access transmitter (if equipped) • the ignition is turned on with an invalid key. Take all keys and remote controls to an authorized dealer if there is any potential alarm problem with your vehicle. Arming the Alarm The system is ready to arm whenever the ignition is off. Lock the vehicle to arm the alarm. The turn signal lamps will flash once after locking the vehicle to indicate the alarm is in the pre-armed mode. It will become fully armed in 20 seconds. 2014 Flex (471) Owners Guide gf, 1st Printing, April 2013 USA (fus)