1994 GMC Jimmy Owner's Manual - Page 86

An indicator light near the lever shows you the transfer case settings: 0 2WHEEL 4HIGH 0 N SET PARKING BRAKE 4LOW The front axle portionof the diagram on the indicator will light up when you shift into four-wheel drive. A slight delay between shifting and the or pattern's lighting is normal. the pattern does not light up, if the front If axle does not go out after you shift out four-wheel drive, have your of dealer check your system. Turn the LIGHTS switch located above your headlight switchto the left to dim your transfer case indicator light when your headlights or parking lights are on. 2 WHEEL: This setting isfor driving in most street and highway situations. in Your front axle is not engaged two-wheel drive. 4 HIGH: This setting engages your front axle to help drive your vehicle. as Use 4 HIGHwhen you need extra traction, such on snowy or icy roads, or in most off-road situations. N SET PARKING BRAKE: Shift to this neutral setting only your when vehicle needs to towed. be 4 LOW: This setting alsoengages your front axle to give extra traction. you You may never need 4 LOW. It sends the maximum power to all four wheels. You might choose 4 LOW if you were driving off-road in sand, mud, or deep snow and climbing or descending steep hills. You can shift from 2 WHEEL to 4 HIGH or from 4 HIGH to 2 WHEEL while the vehicle is moving. is not necessary for you to press the transfer It case shift lever button. Your front axlewill engage faster if you take your foot off of the accelerator for few seconds after you shift. a 2-32