2008 Honda Odyssey Owner's Manual - Page 435

Main Menu Table Of Contents Lights Replacing a Fog Light Bulb Touring models only 5. Insert the new bulb into the assembly and turn it one-quarter turn clockwise to lock it in place. 6. Push the electrical connector onto the new bulb. 7. Turn on the fog lights to test the new bulb. TAB BULB SCREW 8. Reinstall the fog light assembly, then tighten the screw. CONNECTOR 1. Use a Phillips-head screwdriver to remove the screw. 2. Remove the fog light assembly from the bumper by pulling its inner edge first, then the whole assembly out of the bumper. 3. Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down. 4. Remove the bulb from the fog light assembly by turning it onequarter turn counterclockwise. Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter. 432 2008 Odyssey