2002 Mazda MPV Owner's Manual - Page 49

J16L_EA.book Page 41 Friday, February 22, 2002 11:34 AM Essential Safety Equipment Child Restraint 2. To get the retractor into the automatic locking mode, pull the shoulder belt portion of the seat belt until the entire length of the belt is out of the retractor. WARNING Child-Restraint Tether Usage: Using the tether to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor and result in injury. Use the tether and tether anchor only for a childrestraint system. M Third-Row Outboard Seats Child-Restraint System Installation Follow these instructions when using a child-restraint system. NOTE Follow the child-restraint system manufacturer's instructions carefully. Depending on the type of childrestraint system, it may not employ seat belts which are in automatic locking mode. 1. Secure the child-restraint system with the lap portion of the lap/shoulder belt. See the instructions on the childrestraint system for belt routing instructions. 3. Push the child-restraint system firmly into the vehicle seat. Be sure the belt retracts as snugly as possible. Clicking from the retractor will be heard during retraction if the system is in the automatic locking mode. If the belt does not lock the seat down tight, repeat this step. 2-41 Form No. 8Q44-EA-01K