2003 Mazda Tribute Owner's Manual - Page 233

Maintenance and Specifications WARNING: When replacing full size tires, never mix radial bias-belted, or bias-type tires. Use only the tire sizes that are listed on the Certification Label. Make sure that all tires are the same size, speed rating, and load-carrying capacity. Use only the tire combinations recommended on the label. If you do not follow these precautions, your vehicle handling may be affected which can lead to loss of vehicle control, vehicle rollover and/or personal injury. WARNING: Make sure that all replacement tires are of the same size, type, load=carrying capacity and tread (e.g., "All Terrain", etc.), as originally offered by Mazda. Failure to do so can result in tire failure and a serious accident. WARNING: Do not replace your tires with "high performance" tires or larger size tires. WARNING: Failure to follow these precautions may adversely affect the handling of the vehicle, and increase the risk of loss of vehicle control, vehicle rollover and/or personal injury. Tires that are larger or smaller than your vehicle's original tires may also affect the accuracy of your speedometer. USING SNOW TIRES AND TRACTION DEVICES NOTE: Snow tires must be the same size and grade as the tires you currently have on your vehicle. The tires on your vehicle have all-weather treads to provide traction in rain and snow. However, in some climates, using snow tires and traction devices may be necessary. If you need to use snow tires and chains, it is recommended that steel wheels are used of the same size and specification as those originally installed. Follow these guidelines when using snow tires and traction devices: • Do not use tire chains on aluminum wheels. Chains may chip the wheels. • Use only SAE Class S chains • Install chains securely, verifying that the chains do not touch any wiring, brake lines or fuel lines. 233