2006 Mazda MPV Owner's Manual - Page 283

Mazda MPV_8U61-EA-05G_Edition1 Page283 Tuesday, June 21 2005 9:38 AM Black plate (283,1) Maintenance and Care Owner Maintenance 1. Raise the wiper arm and turn the blade assembly to expose the plastic locking clip. Compress the clip and slide the assembly downward; then lift it off the arm. 3. Remove the metal stiffeners from the blade rubber and install them in new blades. Plastic locking clip l CAUTION Don't bend or discard the stiffeners. You need to use them again. If the metal stiffeners are switched, the blade's wiping efficiency could be reduced. So don't use the driver's side metal stiffeners on the passenger's side, or vice versa. Be sure to reinstall the metal stiffeners in the new blade rubber so that the curve is the same as it was in the old blade rubber. CAUTION To prevent damage to the windshield let the wiper arm down easily, don't let it slap down on the windshield. 2. Hold the end of the rubber and pull until the tabs are free of the metal support. l l Metal support Tab 8-23 Form No.8U61-EA-05G