2006 Mazda MPV Owner's Manual - Page 296
2006 Mazda MPV Manual
Page 296 highlights
Mazda MPV_8U61-EA-05G_Edition1 Page296 Tuesday, June 21 2005 9:38 AM Black plate (296,1) Maintenance and Care Owner Maintenance 3. Turn the socket and bulb assembly counterclockwise and remove it. 4. Remove the bulb by pushing it in slightly and turning it counterclockwise. NOTE Bulb replacement is not possible because it is built into the unit. Replace the unit. Parking lights Due to the complexity and difficulty of the procedure, the bulbs should be replaced by an Authorized Mazda Dealer. Brake lights/Taillights, Rear turn signal lights, Reverse lights, Taillights/Rearside marker lights 1. Remove the bolts with a Phillips screwdriver and remove the rear combination component. 2. Turn the socket and bulb assembly counterclockwise and remove it. 3. Disconnect the bulb from the socket. Brake lights/Taillights Rear turn signal lights Reverse lights Taillights/Rear side-marker lights 5. Install the new bulb in the reverse order of removal. Side turn signal lights 1. Slide the unit as shown in the figure to remove it. 2. Detach the electrical connector from the unit by pulling it to the rear. Pull outward 3. Install the new side turn signal unit in the reverse order of removal. 8-36 Form No.8U61-EA-05G