2006 Mazda MPV Owner's Manual - Page 297
2006 Mazda MPV Manual
Page 297 highlights
Mazda MPV_8U61-EA-05G_Edition1 Page297 Tuesday, June 21 2005 9:38 AM Black plate (297,1) Maintenance and Care Owner Maintenance 4. Install the new bulb in the reverse order of removal. High-mount brake lights 1. Remove the liftgate upper trim. 2. Push the tab as shown in the figure, and then remove the high-mount brake light unit. NOTE An unsecured high-mount brake light will allow water to leak into the vehicle. Make sure the high-mount brake light is tightly fastened to the vehicle and if water still leaks, consult an Authorized Mazda Dealer. License plate lights 1. Slide the unit as shown in the figure to remove it. 2. Turn the socket and bulb assembly counterclockwise and remove it. 3. Disconnect the bulb from the socket. 3. Turn the socket and bulb assembly counterclockwise and remove it. 4. Disconnect the bulb from the socket. 4. Install the new bulb in the reverse order of removal. qReplacing Interior Light Bulbs Overhead light/Map lights 5. Install the new bulb in the reverse order of removal. 1. Wrap a small flathead screwdriver with a soft cloth to prevent damage to the lens and remove the lens by carefully prying on the edge of the lens with the screwdriver. 2. Disconnect the bulb by pulling it out. 8-37 Form No.8U61-EA-05G