2003 Mercedes E-Class Owner's Manual - Page 139
2003 Mercedes E-Class Manual
Page 139 highlights
Controls in detail Control system Setting daytime running lamp mode (USA only) Move the selection marker with the æ or ç button to the Lighting submenu. Press button j or k repeatedly until you see this message in the display: Lamp circuit headlamp. The selection marker is on the current setting. With daytime running lamp mode selected and the exterior lamp switch at position 0, the following lamps will come on automatically when the engine is turned on: Parking lamps and low beam headlamps License plate lamps (in low ambient light conditions) Setting locator lighting During darkness, the following lamps will come on when the locator lighting feature is activated and the vehicle is unlocked by remote control: Parking lamps Tail lamps License plate lamps Front fog lamps The exterior lamp switch must be set to position U ( page 112). The locator lighting switches off when the driver's door is opened. It switches off automatically after a period of approximately 40 seconds. Move the selection marker with the æ or ç button to the Lighting submenu. Press button j or k repeatedly until you see this message in the display: Function Surround lighting. i If you turn the exterior lamp switch to another position, the corresponding lamp(s) will switch on. For safety reasons, resetting the Lighting submenu to factory settings ( page 131) will not reset the daytime running lamp mode. In the display you will then see the message: Lighting Press æ or ç to select manual or daytime running lamp (constant) mode. This function is not available in countries where daytime running lamps are mandatory. 139