2004 Mercedes C-Class Owner's Manual - Page 63
2004 Mercedes C-Class Manual
Page 63 highlights
Safety and Security Occupant safety Emergency tensioning device (ETD), seat belt force limiter The seat belts for the front and rear outer seats are equipped with emergency tensioning devices and belt force limiters. The ETD is designed to activate in the following cases when the seat belts are fastened: in frontal or rear-end impacts exceeding a preset severity level. if the restraint systems are operational and functioning correctly. See 1 indicator lamp ( page 54). In an impact, emergency tensioning devices remove slack from the belts in such a way that the seat belts fit more snugly against the body. Belt force limiters reduce the force exerted by the seat belts on occupants during a crash. Children in the vehicle If an infant or child is traveling with you in the vehicle: Secure the child using an infant or child restraint appropriate to the age and size of the child and recommended for use by Mercedes-Benz. Ensure that the infant or child is properly secured by a belt at all times while the vehicle is in motion. Infant and child restraint seats and information on choosing an appropriate restraint system can be obtained from any Mercedes-Benz Center. Infant and child restraint systems Only use a BabySmartTM1 compatible child restraint for the front passenger seat in this vehicle. Warning! G An emergency tensioning device (ETD) that was activated must be replaced. When scrapping the emergency tensioning device, our safety instructions must be followed. These are available at your authorized Mercedes-Benz Center. ! Do not place objects heavier than 20 lbs (9 kg) on the front passenger seat. This could cause the front or side impact airbag on the front passenger side to deploy in a crash which exceeds the system's deployment threshold. 1 BabySmartTM is a trademark of Siemens Automotive Corp. 63