2004 Mercury Grand Marquis Owner Guide 3rd Printing - Page 80
2004 Mercury Grand Marquis Manual
Page 80 highlights
Locks and Security 6. The door locks will lock/unlock to confirm programming mode is entered/active. 7. With the ignition still in the ON position, press the unlock control once. After a five to ten second delay, the door will lock/unlock to confirm successful programming. 8. After having waited the necessary time for the programming to confirm, turn the ignition to OFF. Once disabled, the autolock feature can be enabled by repeating the procedure in steps 1-8. KEYLESS ENTRY SYSTEM (IF EQUIPPED) With the keyless entry keypad, you can: 1 2 3 4 5 6 7 8 9 0 • lock or unlock the vehicle doors without using the key. • open the trunk. See also Remote entry system in this chapter for more information. Your vehicle has a factory-set 5-digit code that operates the keyless entry system. You can also program your own 5-digit personal entry code. The factory-set code is located: • On the owner's wallet card in the glove compartment, • Taped to the computer module, or • At your dealer. When using the keyless entry keypad, press the middle of each button in order to ensure a good activation. Programming a personal entry code You can program up to three personal codes to unlock your vehicle. These codes do not replace the permanent code that the dealership gave you. To create your own personal entry code: 1. Enter the factory set code. Note: The keypad will illuminate when pressed. 2. Within five seconds press 1 • 2 on the keypad to enter the programming mode. 80 2004 Grand Marquis (grn) Owners Guide (post-2002-fmt) USA English (fus)