2002 Nissan Sentra Owner's Manual - Page 216
2002 Nissan Sentra Manual
Page 216 highlights
INSTALLING FRONT LICENSE PLATE Use the following steps to mount the front license plate: 1. Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the drill. Install the license plate holder using the two screws provided with the holder. 2. Mount the license plate using two M6-14mm bolts. License plate bolt tightening torque: 3.8 to 4.7 ft-lb (5.10 to 6.37 N m) LTI0010 Technical and consumer information 9-13
Use the following steps to mount the front
license plate:
1. Make holes on the plastic finisher at the
location mark (small dimple) using a 0.31
in (8 mm) drill. Apply light pressure to the
drill. Install the license plate holder using
the two screws provided with the holder.
2. Mount
the
license
plate
using
two
M6-14mm bolts.
License plate bolt tightening torque:
3.8 to 4.7 ft-lb (5.10 to 6.37 N
±
m)
LTI0010
INSTALLING FRONT LICENSE
PLATE
Technical and consumer information
9-13