2003 Nissan Murano Owner's Manual - Page 10

4. Remove the head restraints. 5. After removing the tonneau cover (if so equipped) from each rear seatback, pull the A B strap on the rear seat k or pull the lever k beside the cargo area and fold the seatback. 6. When returning the seatbacks, be sure to install the head restraints and attach the rear center seat belt connector. WARNING SPA0467 SSS0226 Lumbar support (if so equipped for driver's seat) The lumbar support feature provides lower back support to the driver. Move the lever up or down to adjust the seat lumbar area. REAR SEAT ADJUSTMENT Folding 1. Secure the seat belt at the belt hooks on the side wall. See "Seat belt hook" later in this section. 2. Secure the center seat belt and tongues into the retractor base. See "Stowing rear center seat belt" later in this section. 3. Put the seat belt buckles into the seat cushion. See "Storing rear seat belt buckles" later in this section. ¼ Never allow anyone to ride in the cargo area or on the rear seat when it is in the fold-down position. Use of these areas by passengers without proper restraints could result in serious injury in an accident or sudden stop. ¼ It is extremely dangerous to ride in a cargo area inside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. ¼ Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. Seats, restraints and supplemental air bag systems 1-5